usb-audio: "Texas Instruments Japan PCM2900" lacht nicht
Verfasst: So Okt 12, 2014 5:57 pm
so, ich versuch es nochmal,
mein audiointerface:
lspci:
Bus 001 Device 009: ID 08bb:2900 Texas Instruments Japan PCM2900 Audio Codec
dmesg:
[ 90.908301] usb 1-4.3: new full-speed USB device number 9 using ehci_hcd
[ 91.003921] usb 1-4.3: New USB device found, idVendor=08bb, idProduct=2900
[ 91.003930] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 91.003937] usb 1-4.3: Product: USB Audio CODEC
[ 91.003943] usb 1-4.3: Manufacturer: Burr-Brown from TI
[ 91.005959] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/1-4.3:1.3/input/input13
[ 91.006344] generic-usb 0003:08BB:2900.0002: input,hidraw1: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:1a.7-4.3/input3
[ 91.050787] usbcore: registered new interface driver snd-usb-audio
nimmt ja nicht auf, abspielen funktioniert....
hat wer einen schimmer?
im qjackctl erscheinen beide kanäle:
JACK server starting in realtime mode with priority 10
control device hw:1
control device hw:1
audio_reservation_init
Acquire audio card Audio1
creating alsa driver ... hw:1,0|hw:1,0|512|2|44100|0|0|nomon|swmeter|-|32bit
control device hw:1
configuring for 44100Hz, period = 512 frames (11.6 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 16bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 16bit little-endian
ALSA: use 2 periods for playback
hmmmmmmmmmmmmmmmmmmmmmm
gruss
c.
mein audiointerface:
lspci:
Bus 001 Device 009: ID 08bb:2900 Texas Instruments Japan PCM2900 Audio Codec
dmesg:
[ 90.908301] usb 1-4.3: new full-speed USB device number 9 using ehci_hcd
[ 91.003921] usb 1-4.3: New USB device found, idVendor=08bb, idProduct=2900
[ 91.003930] usb 1-4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 91.003937] usb 1-4.3: Product: USB Audio CODEC
[ 91.003943] usb 1-4.3: Manufacturer: Burr-Brown from TI
[ 91.005959] input: Burr-Brown from TI USB Audio CODEC as /devices/pci0000:00/0000:00:1a.7/usb1/1-4/1-4.3/1-4.3:1.3/input/input13
[ 91.006344] generic-usb 0003:08BB:2900.0002: input,hidraw1: USB HID v1.00 Device [Burr-Brown from TI USB Audio CODEC ] on usb-0000:00:1a.7-4.3/input3
[ 91.050787] usbcore: registered new interface driver snd-usb-audio
nimmt ja nicht auf, abspielen funktioniert....
hat wer einen schimmer?
im qjackctl erscheinen beide kanäle:
JACK server starting in realtime mode with priority 10
control device hw:1
control device hw:1
audio_reservation_init
Acquire audio card Audio1
creating alsa driver ... hw:1,0|hw:1,0|512|2|44100|0|0|nomon|swmeter|-|32bit
control device hw:1
configuring for 44100Hz, period = 512 frames (11.6 ms), buffer = 2 periods
ALSA: final selected sample format for capture: 16bit little-endian
ALSA: use 2 periods for capture
ALSA: final selected sample format for playback: 16bit little-endian
ALSA: use 2 periods for playback
hmmmmmmmmmmmmmmmmmmmmmm
gruss
c.